Planet Switch SGSW-24040HP

Planet Switch SGSW-24040HP

Centralized Power Management for Gigabit Ethernet Networking
To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, PLANET SGSW-24040HP is the 24-Port Gigabit High Power over Ethernet Managed Switch which features high performance Gigabit IEEE 802.3af PoE (Up to 15.4W) and IEEE 802.3at High-Power PoE (Up to 30.8W) on all ports. By supporting reliable stacking technology and advanced networking features, the SGSW-24040HP also provides high scalability for current and future network infrastructure as it can flexibly work with PLANET SGSW series Gigabit Switch to meet the various networking requirements and simplify the network deployment and management.

30-watt Power over Ethernet
A maximum of 30.8 watts is available on the Gigabit ports of the SGSW-24040HP for powering PDs (Powered Devices), with a maximum PoE delivery of 360 watts for all ports to per device in order to satisfy the increasing needs of power consumption by powered devices. Providing Gigabit throughput and high power supply, the SGSW-24040HP optimizes the installation and power management of network devices such as 11n wireless access points (AP) with Gigabit PoE LAN port, security PTZ (Speed Dome) network video cameras, large screen PoE video phones, thin-clients and more.

E-Mail / SNMP Trap Alarm
The SGSW-24040HP provides built-in SMTP and SNMP Trap alarm function that can send instant alarm to the administrators by email when errors happen. The errors like when the connected PD devices such as IP cameras or wireless access point were changed or when the Ethernet cable was broken or loosened, the SGSW-24040HP would detect it and spontaneously send the error alarm to the assigned receiver or network management center. It also records when the error and the recovery status happen.

PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environment protection on the Earth, the SGSW-24040HP can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.

Physical Port
•24-Port 10/100/1000Base-T Gigabit RJ-45 with IEEE 802.3af / 802.3at PoE Injector
•4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-21 to Port-24
•2 HDMI-like 5GbE Stacking interfaces
•RS-232 DB9 console interface for Switch basic management and setup

Power over Ethernet
•Complies with IEEE 802.3af / 802.3at Power over Ethernet End-Span PSE
•Up to 23 IEEE 802.3af devices powered
•Up to 11 IEEE 802.3at devices powered
•Supports PoE Power up to 30.8 watts for each PoE port
•Auto detect powered device (PD)
•Circuit protection prevents power interference between ports
•Remote power feeding up to 100m
•PoE Management
–Total PoE power budget control
–Per Port PoE function enable/disable
–PoE Port Power feeding priority
–Per PoE port power limit
–PD classification detection

•Hardware stack up to 16 units and 384 Gigabit ports
•Single IP address stack management
•Stacking architecture supports Chain and Ring mode
•Plug and Play connectivity
•Mirror across stack
•Link Aggregation groups spanning multiple switches in a stack
•Hardware learning with MAC table synchronization across stack

Layer 2 Features 
•Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
•High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC
filtering eliminates erroneous packets to optimize the network bandwidth
•Supports VLAN
–IEEE 802.1Q Tagged VLAN
–Up to 255 VLANs groups, out of 4041 VLAN IDs
–Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
–Private VLAN Edge (PVE)
•Supports Spanning Tree Protocol
–STP, IEEE 802.1D (Spanning Tree Protocol)
–RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
–MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol), spanning tree by VLAN
–BPDU Guard 
•Supports Link Aggregation
–802.3ad Link Aggregation Control Protocol (LACP)
–Cisco ether-channel (static trunk)
–Maximum 12 trunk groups, up to 16 ports per trunk group 
–Up to 32Gbps bandwidth (Duplex Mode)
•Provides port mirror (many-to-1)
•Port mirroring to monitor the incoming or outgoing traffic on a particular port 

Quality of Service
•Ingress Shaper and Egress Rate Limit per port bandwidth control
•4 priority queues on all switch ports
•Traffic classification:
–IEEE 802.1p CoS
–TOS / DSCP / IP Precedence of IPv4/IPv6 packets
–IP TCP/UDP port number
–Typical network application
•Strict priority and Weighted Round Robin (WRR) CoS policies
•Supports QoS and In/Out bandwidth control on each port
•Traffic-policing policies on the switch port
•QoS Control List Wizard makes QoS creation and configuration easier and more quickly 
•DSCP remarking 
•Voice VLAN

•Supports IGMP Snooping v1, v2 and v3
•Querier mode support
•IGMP Snooping port filtering and throttling
•Multicast VLAN Registration (MVR)

•IEEE 802.1X Port-based / MAC-based network access authentication
•Built-in RADIUS client to co-operate with the RADIUS servers
•TACACS+ login users access authentication
•RADIUS / TACACS+ users access authentication
•IP-based Access Control List (ACL)
•MAC-based Access Control List
•Source MAC / IP address binding
•DHCP Snooping to filter un-trusted DHCP messages
•Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
•IP Source Guard prevents IP spoofing attacks
•Auto DoS rule to defend DoS attack
•IP address access management to prevent unauthorized intruder

•Switch Management Interfaces
–Console / Telnet Command Line Interface 
–Web switch management
–SNMP v1, v2c, and v3 switch management
–SSH / SSL secure access
•Four RMON groups (history, statistics, alarms, and events) 
•IPv6 IP Address / NTP / DNS management
•Built-in Trivial File Transfer Protocol (TFTP) client
•BOOTP and DHCP for IP address assignment
•Firmware upload/download via HTTP / TFTP
•DHCP Relay and Relay Option 82
•User Privilege levels control
•NTP (Network Time Protocol)
•Link Layer Discovery Protocol (LLDP) Protocol
•Cable Diagnostic technology provides the mechanism to detect and report suspicious cabling issues
•Reset button for system reboot or reset to factory default
•PLANET Smart Discovery Utility for deploy management

Warranty Non Warranty

Write a review

Please login or register to review

Cek Ketersediaan

Mohon hubungi sales online support, untuk detail harga dan ketersediaan stok.


Gratis Ongkos Kirim

Dengan syarat dan ketentuan yang berlaku.


  • Product Code: Planet Switch SGSW-24040HP
  • SKU No. :
  • Availability: In Stock
  • Rp. 7,670,000

Tags: Other Electronic, Fiber Optic & Network